A Design Consultation to Perfectly Customize the Polyurea Floor Coating in Your St. Louis Home or Business

Laundry, utility room.

At Concrete Coatings by Patriot, we offer the product you need to perfect your concrete pad once and for all: Penntek™ Industrial Coating’s polyurea coating system. This revolutionary system provides a durable, long-lasting finish to any concrete floor, and our knowledgeable and courteous design consultants will help you pick the perfect look for your particular area during a free consultation.

 

What To Expect During Your Free Consult

Our goal during the design consultation is to provide all the information you’ll need about our product and our company so that you can make an informed decision. We never use high-pressure sales tactics; rather, we’ll take the time to learn about your space and show you how our unique polyurea floor coating system can improve it.

Here’s what to expect during your initial design consultation with Concrete Coatings by Patriot:

First, one of our design consultants will go over the Penntek polyurea coating, explaining its composition and illustrating why this product is superior to other concrete floor coatings on the market.

Then, we’ll perform a short survey to identify the problems you’re having. For example, is your current concrete floor cracking? Or are you just looking to finish the space?

Following this, we will analyze the slab to see what repairs (if any) are needed, and whether the Penntek polyurea coating system can provide a solution. Our design consultant will thoroughly explain the installation process.

Our design consultant will then go through samples and explain all of the colors that are available. Together, you and the design consultant will identify the choice that best suits your particular concrete area. 

     

Finally, your consultant will provide you with an exact quote (not an estimate) for your project. We do have financing options available to our customers who qualify, enabling this home or business improvement to easily fit into a wide range of budgets.

How Your Project Will Proceed After Your Consultation

Finished in one day.

Following your design consultation, we’ll get the project rolling as soon as possible. When our team is able to schedule the work to be completed, based mostly on the results of concrete pick and moisture tests, location of the pad, and current weather patterns, you will enjoy the convenience of a quick and efficient coating application that will take just one day. In fact, you’ll be able to use the space where the coating has been applied the same day we install it – you can even walk on the surface in as little as four hours after installation is complete!

To schedule your free design consultation or to get more information on the polyurea coating we offer to our customers throughout St. Louis, Missouri, and the surrounding communities, contact Concrete Coatings by Patriot. We would be happy to answer any questions you have.

Schedule A FREE Consultation

Don’t tear out your old concrete floor or pad!

That can be very expensive! Choose Concrete Coatings by Patriot to make your floor look fantastic with a polyurea coating.

Professional Installation from the St. Louis Area Concrete Floor Coating Contractor You Can Trust

Concrete Coatings by Patriot is an authorized dealer of Penntek™ Industrial Coating’s polyurea chip system, a revolutionary concrete coating system that makes concrete floors durable, gorgeous, and stain resistant, among other incredible attributes. However, a product is only as good as the people who install it. Thus, all of our installers are factory trained by Penntek, so they’re thoroughly knowledgeable on the precise methods needed to ensure the coating is perfectly installed.

What You Can Expect During Installation

Our professional installation method is as follows:

Extensively damaged floor with diamond sanding.

To begin, our installers will complete a pick test that starts with a plastic tip and ends with a diamond tip. A rating of one to nine will be given, indicating how soft or hard the concrete is. This enables us to determine what types of diamonds to use on the grinder later on in the process.

We will use a moisture reader to learn how much moisture is in the concrete. In order to complete the installation, there must be a very low amount of present moisture and there must be dry weather.

If/when the concrete is dry enough, preparation work will start. Unlike when applying epoxy or standard paint, absolutely no chemicals are used when our concrete floor coating contractors install our chip system, so you won’t have to worry about potentially harmful runoff damaging your yard or home.

Damage repaired with mender fill and sanded.

Using the information gleaned during the pick test, a 30-inch planetary diamond grinder is used to smooth the slab. This machine is powered by propane brought onsite by our company as opposed to running off your home’s electricity. Approximately 95 percent of the dust generated by grinding the slab is encapsulated in the grinder’s shroud and sucked up through a vacuum, leaving the workspace clean and tidy.

After the concrete has been smoothed out, any cracks or holes that are exposed are filled with the Penntek mender system. Once the mender has cured, we will hand grind over it to smooth out the slab once more for final prep before coating application begins.

Garage floor – ready to walk on in one day.

A self-priming polyurea base coat is the first portion applied to the slab, following by ¼ inch vinyl chips that are broadcast by hand to add a beautiful texture to the floor. This sets for one hour.

After the chips have settled, we will scrape them – first north to south, then east to west – to make sure they are set.

Finally, the UV-stable, antimicrobial, 100-percent solid clear top coat is applied to finish off the polyurea chip system.

Perhaps most importantly, this is all done in a single day. In fact, you’ll be able to walk on the area a few hours after installation is complete, something you can’t do when using standard paint or other types of concrete floor coatings, such as epoxy.

Perhaps most importantly, this is all done in a single day. In fact, you’ll be able to walk on the area a few hours after installation is complete, something you can’t do when using standard paint or other types of concrete floor coatings, such as epoxy.

For more information on why we are the concrete floor coating contractor to turn to for a durable and proven concrete coating solution in the St. Louis area, contact Concrete Coatings by Patriot today.

When you call, be sure to ask about the financing options that may be available to you, as well as the exceptional warranty we offer on all concrete floor coatings.

Schedule A FREE Consultation